T-Piece Marine Ladder 500mm HDG
Want to view our prices?
Our pricing is exclusively available to registered customers.
Variations
Product information
| Type of side joist : | Flat profile |
|---|---|
| Type of rung : | Perforated profile |
| Suitable for cable ladder height : | 30 mm |
| Suitable for cable ladder width : | 500 mm |
| Cable ladder branch width : | 500 mm |
| Symmetrical model : | Yes |
| Inner radius : | 150 mm |
| Model : | Without connector |
| Material : | Steel |
| Material quality : | Other |
| Surface protection : | Hot-dip galvanised |
| Colour : | Zinc |
The Eurostrut ESL-T Tee Piece is a horizontal branch fitting for the ESL marine ladder, designed to create branch connections within cable routing systems. The tee piece enables a main cable route to split into multiple directions while maintaining continuous cable support, ventilation, and structural integrity. It is suitable for use in commercial buildings, industrial installations, machine construction, and marine environments.
The tee piece is manufactured from cold-formed carbon steel and is supplied as standard with a hot-dip galvanized finish in accordance with NEN-EN-ISO 1461. The heavy-duty zinc coating of approximately 85–120 µm provides enhanced long-term corrosion protection, making the fitting suitable for outdoor installations and demanding industrial or marine environments with increased corrosion exposure. The cable support system is designed and manufactured in accordance with IEC 61537 / EN 61537 and is suitable for installations designed in accordance with IEC 60364 and comparable national installation standards.
The construction is designed specifically for the Eurostrut ESL marine ladder system and features an open ladder design with perforated rungs (20 × 8.5 mm) and solid side rails without perforations, ensuring consistent cable support throughout the complete branch section. The tee piece is connected to straight ladder sections using ESL-SC or ESL-VC splice plates (not included). The ESL-T is fully compatible with the complete Eurostrut ESL system, including divider strips (ESL-DIV), hold-down clamps (ESL-HC), hook bolts (ESL-HB), and fixing sets (ESL-SB, EFS).
Technical Specifications
- Product Type: Horizontal tee piece for light-duty cable ladder (marine ladder)
- System: ESL
- System Height: 30 mm
- System Width: 75 to 500 mm
- Side Rail Thickness: 5 mm
- Rung Thickness: 4 mm
- Rung Perforation: 20 × 8.5 mm
- Material: Carbon steel
- Surface Finish: Hot-dip galvanized according to NEN-EN-ISO 1461
- Zinc Coating Thickness: Approx. 85–120 µm
- Connection Method: Using ESL-SC or ESL-VC splice plates (not included)
- Standard: IEC 61537 / EN 61537
- Installation Standard: IEC 60364
- Side Rail Design: Solid profile without perforations
- Construction Type: Open ladder structure
Typical Applications
- Horizontal cable route branching
- Cable distribution in commercial and technical buildings
- Industrial installations and machine construction
- Marine and offshore applications
- Continuous cable support at branch connections
Available Variants
- ESL-T-H: Hot-dip galvanized finish (standard) for general indoor and outdoor applications
- ESL-T-S304: Stainless steel 304 (A2) for corrosion-sensitive environments
- ESL-T-S316: Stainless steel 316L (A4) for severe and chloride-rich environments
Related Products
For a complete installation, Eurostrut offers a wide range of compatible accessories, including:
- Straight Sections: ESL marine ladder sections
- Splice Plates: ESL-SC splice plates, ESL-VC vertical splice plates
- Dividers: ESL-DIV divider strips
- Fixing Components: ESL-HC hold-down clamps, ESL-HB hook bolts
- Fixing Sets: ESL-SB and EFS fixing sets
These components ensure a safe, fully compatible, and low-maintenance cable support installation.
Other widths available on request.
Eurostrut_ESL-T_T-piece for Marine Ladder ESL.rfa
