Cable Ladder 200mm HDG
Want to view our prices?
Our pricing is exclusively available to registered customers.
Variations
Product information
| Type of side joist : | Profile (open) |
|---|---|
| Side perforation : | Yes |
| Type of rung : | Perforated profile |
| Fixation rung : | Welded |
| Height : | 60 mm |
| Width : | 200 mm |
| Length : | 6000 mm |
| Working length : | 6000 mm |
| Rung centre spacing : | 250 mm |
| Material : | Steel |
| Material quality : | St 37.2 (1.0037) |
| Surface protection : | Hot-dip galvanised |
| Colour : | Zinc |
H=60mm, W=200mm, L=6000mm, T=1,5mm, Hot Dip Galvanized Carbon Steel, layer 60 to 70µm. Heavy Duty.
The ECL60 cable ladder is designed for the safe and organized support of power, control, and data cables in commercial, industrial, and infrastructure installations. Its open ladder construction provides optimum cable ventilation while allowing easy cable installation, branching, and support over long distances. The cable ladder is suitable for wall, ceiling, and floor-mounted support systems and is fully compatible with the Eurostrut cable ladder system.
The standard version is manufactured from hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a zinc coating thickness of 60 to 70 µm. Hot dip galvanizing is applied after fabrication, providing complete corrosion protection to all surfaces, welded joints, and cut edges. The cable ladder is also available in stainless steel AISI 304 (1.4301) and AISI 316L (1.4404) for corrosive or hygienic environments. A RAL powder-coated finish is available on request.
The cable ladder features a 60 mm side rail height and is constructed with rungs welded to both side rails, providing high structural strength. The rung spacing is 250 mm, while the side rails are equipped with a single row of perforations for the installation of fixings and accessories. The cable ladder is compatible with couplers, bends, tees, crosses, inside risers, outside risers, support brackets, suspension systems, and all other ECL60 system components.
Technical Specifications
- Product type: Cable ladder
- System: ECL60
- Side rail height: 60 mm
- Nominal width: 100 to 600 mm
- Overall width: Nominal width + 46 mm
- Standard length: 6000 mm
- 3000 mm length: Available on request
- Material thickness: 1.5 mm
- Rung spacing: 250 mm
- Rung construction: Welded to both side rails
- Side rails: Single row of perforations
- Material: Carbon steel
- Surface finish: Hot dip galvanized according to NEN-EN-ISO 1461
- Zinc coating thickness: 60 to 70 µm
- Standards: IEC 61537, suitable for installations in accordance with NEN 1010
Typical Applications
- Main and distribution cable routes
- Industrial installations
- Commercial buildings
- Data centres and technical facilities
- Infrastructure projects
- Machine and process installations
Available Material Variants
- HDG: Hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a zinc coating thickness of 60 to 70 µm, suitable for industrial and outdoor environments.
- Stainless Steel 304 (A2 / 1.4301): Suitable for indoor environments and lightly corrosive conditions.
- Stainless Steel 316L (A4 / 1.4404): Provides enhanced corrosion resistance for chemical, marine, offshore, and aggressive environments.
- RAL: RAL powder-coated carbon steel, available on request for project-specific applications.
Complementary Products
For a complete installation within the ECL60 system, the following components are available:
- Couplers: For longitudinal cable ladder connections.
- Bends and fittings: Horizontal and vertical bends, tees, crosses, inside risers, outside risers, and reducers.
- Support systems: Wall brackets, ceiling brackets, trapeze hangers, and strut channels.
- Fixing materials: Bolt sets, clamps, and mounting accessories.
- Divider plates and accessories: For cable separation and additional functionality.
These components ensure a safe, fully compatible, and maintenance-friendly cable support installation.
Other widths and lengths are available on request.
ECL60_Cable Ladder 60mm_Overview.pdf
